Other - sewing accessories

Heat activated adhesive tape 10mm

(1 customer review)


Only 10 left in stock

SKU: 0589 Categories: Tags: ,


This is industrial adhesive tape that can be used to bond certain type of fabrics, zippers etc.

Adhesive is transparent, PU based with blue backing tape. It sticks well to PU and TPU coated fabric. It also sticks to fabric with good texture. 

You need to apply it in 3 steps:

  1. Attach it to the first fabric piece with low heat 110-120°C. Make sure the blue part of the tape is facing away from the fabric.It is important to keep the low heat otherwise the blue bacing tape will melt as well. If you use domestic iron start with the lowest setting. If the temperature is stil too high that it melts the blue scrim, then use some baking paper in between the iron an the tape.
  2. Remove the blue backing tape
  3. Attach the second fabric piece and use a higher heat setting 150-180°C

You can skip step 1. and 2.  if you peel off the blue backing tape beforehand.

For best results try to apply hand pressure.

Width: 10mm

Adhesive softening point: 104°C

Price per meter.

Try iron settings and fabric compatibility on some scrap fabric before applying it to your project!


1 review for Heat activated adhesive tape 10mm

  1. Klemens Ullmann-Marx (verified owner)

    Tested it on a bit of PU coated nylon: pretty strong on PU coating side, lower adhesion on non coated side.

Add a review

Your email address will not be published. Required fields are marked *